PCIe x1 10/100/1000Mbps Single-port RJ45 Network Interface Card (Intel I211)

$ 999.00

Detail

Parameters

Review

LREC9202CT is a PCI Express v1.1 x1 manageable Gigabit RJ45 Single Port Network Card.The Card contains two transmit and two receive queues for the single port. It has advanced interrupt-handling,IPv4 and IPv6 checksum offload,TCP/UDP checksum offload features and the Auto-Negotiation (Nway) function ,Jumbo Frame support.With single UTP/STP and the Auto-Negotiation (Nway) function support, the Card can auto-negotiate 10Mbps, 100Mbps or 1000Mbps speed, and half or full duplex mode with its link partner (a hub, for example). Supports ACPI, compliant with PCI Express2.1. Full range of drivers are provided for major Operating Systems.

Key Features

• Single Port 10/100/1000Mbps adapter
• PCI Express v1.1 x1 lane
• RJ45 Connectivity
• Low-cost, low-power
• VLAN Support
• Innovative power management features
• MSI,MSI-X support
• Excellent small packet performance for network appliances
• Low profile and full-height bracket

Controller	Intel I211
Transmission rate per port	10/100/1000Mbps
Network Standard Physical Layer Interfaces	1000BASE-T:Cat 5eor higherup to 100m
	100BASE-Tx:Cat5/5e/6or higherup to 100m
	10BASE-T: Cat3/4/5/5e/6or higherup to 100m
Jumbo Frame Support	Up to 9.5 KB
Operating Temperature	0 °C to 55 °C (32 °F to 131 °F)
Network Virtualization
LED Indicators	1000Mbps/s:Yellow Link and Green Ack,
LED Indicators	100Mbps/s:Green Link and Green Ack,10Mbps/s: Not illuminate
Operating System Support	Windows Server2008 / 2008 R2 / 2012 /2012 R2 /2016 R2
	Windows 7 / 8 / 8.1 / 10
	Linux Stable Kernel version 2.6.x / 3.x / 4.x or later
	Linux SLES 10 / 11 or later
	VMvare ESX/ESXi 5.x/6.x or later